Hydrotechnik 3402-CX10-D100-000 Operating Instructions Manual Download Page 31 | Manualshive

Page: 31 / 48

Hydrotechnik 3402-CX10-D100-000 Operating Instructions Manual Download Page 31

USE WITH A MULTISYSTEM MEASUREMENT

INSTRUMENT

HySense

®

CX 197

31

ENG

•

After confirming the selection with F5 (OK), the export procedure can be
started with F5 (START).

5.1.7 Evaluating measurements

The CSV measurement files can be copied into a template file that is available
for download on the HYDROTECHNIK GmbH homepage at:
HYDROTECHNIK.com. The tool is called:

“Analysis tool_HySense® CX 197.”

The file can be opened with Excel and the entire measurement file transferred
to the tool with copy and paste.

The tool offers the opportunity to display any measurement in a report with a
graphic evaluation of the entire measurement process. The limits entered in the
process are considered and the condition is also evaluated.

There are precise instructions on the overview page in the tool.

Figure 22: left: Selection of the file type: right: Selection of the measurement files

«
...
29
30
31
32
33
...
»

Summary of Contents for 3402-CX10-D100-000

















































Reviews:

No comments