USE WITH A MULTISYSTEM MEASUREMENT
INSTRUMENT
HySense
®
CX 197
21
ENG
5.1.2
Operating the “HySense CX 197” function
If you start the “HySense CX 197” function, there is an automatic search for
connected oil condition sensors. Here, the measurement instrument searches
automatically with the baud rate 125 kBit/s and 250 kBit/s. Setting the baud rate
on the MultiSystem 5070 is thus no longer necessary.
If the measurement instrument finds sensors, the sensors found are displayed.
By confirming with the F5 (OK) key, the instrument is in ONLINE mode. If no
sensors are found, the OFFLINE mode is activated.
Figure 10
: Main menu of the user function “HySense CX 197” for the MultiSystem 5070/4070