HydroQuip PLUS OZONE, Injector Kit Connection And Adjustment Procedure, Page: 1 / 9

1
PLUS OZONE™ INJECTOR KIT
CONNECTION AND ADJUSTMENT PROCEDURE
Read all instructions prior to performing work. If you do not understand these instruction or
are unable to perform the work, contact your system provider for assistance
8000 systems equipped with a factory installed Plus Ozone™ come with a visible green logo on the cabinet
access door and the Plus Ozone™ generator installed into the upper cabinet. Reference Dia. #1
SAVE THESE INSTRUCTIONS
Kit includes: Tools and supplies needed:
1ea. Ozone Injector Manifold *Timer with second hand
1ea. Ozone Check Valve Kit
*16oz water bottle
*Only needed for type #2 setup
NOTICE!
If you choose to disconnect the Plus Ozone™ purification system, or need to electrically disarm it for any
reason, follow the “Disable Plus Ozone™ Option” provided in this instruction
ELECTRICAL CONNECTION
The Plus Ozone™ generator comes pre-wired to the 8000 control system as shown in Dia #1, there are no additional
electrical connections required
Dia. #1