22 Hydro-Probe XT User Guide HD0538 Rev: 1.6.0
3 Installing the Sensor
There are three mounting accessories available from Hydronix.
3.1
Standard mounting sleeve (part no 0025)
The Hydro-Probe XT can also be mounted vertically using the Standard Mounting Sleeve,
however Hydronix would recommend using the Flanged Mounting Sleeve, see Figure 15
<338mm
50mm
170mm
218mm
89
mm
Figure 13: The standard mounting sleeve (part no 0025)
3.2
Extension mounting sleeve (part no 0026)
For installation in larger bins.
106
mm
440mm
305mm
<583mm
50mm
Bin Wall
A
B
A – Sensor is secured to the inner sleeve by 6 hex screws (use Locktite or similar) on screw threads
B – Outer sleeve welded to bin
Figure 14: The extension mounting sleeve (part no 0026)
Summary of Contents for Hydro-Probe XT
