Hydro-View User Guide HD0531 Rev 2.0.0 15
Chapter 1
Introduction
Figure 1: The Hydro-View
This Hydro-View User Guide is only valid for model number HV04 running software
version 2.0.0 and above. User guides for earlier Hydro-View model numbers are available
from www.hydronix.com
1 Introduction to the Hydro-View (HV04)
The Hydro-View is a touch screen computer based upon the Microsoft Windows CE operating
system that has been designed to work with the Hydronix range of sensors to provide a live
display of on-line process measurements and enable quick and easy calibration and
configuration of the sensors. The Hydro-View can connect to up to 16 sensors at one time.
Its main display page supports 1, 2 or 4 screen areas, each of which is configurable to display a
trend graph or numeric display of measurements from any connected sensor.
The Hydro-View stores multiple material calibrations for each sensor, allowing rapid re-calibration
if the material being measured is changed. The intuitive multi-point calibration feature enables
the sensor to be easily and precisely calibrated.
As well as being connected to a Hydro-View, the sensors can also be integrated with a control
system via their analogue outputs. Digital inputs and outputs on the sensors allow for averaging
start and stop in a batch process.
In order to correctly understand the use of the Hydro-View unit it is important to understand the
capabilities of the sensor that is to be attached to the unit. Please read the relevant user guide
that is supplied with the sensor. Alternatively please download the user guide from the Hydronix
website: www.hydronix.com
All sensor configuration options in this guide reference Hydronix sensors utilising firmware
HS0102 or above. Some facilities detailed will not be available with all sensors.
Summary of Contents for HV04
