HYDROLAB Surveyor HL, User Manual

Page: 6 / 226

Figure 2 Instrument components
1 Hydrolab
®
Surveyor
®
HL 3 USB cable with mini-USB connector, 1 m (3 ft)
2 Lithium battery pack 4 Battery charger, 100–240 VAC
Startup
Lithium battery safety
W A R N I N G
Fire and explosion hazard. Lithium batteries may get hot, explode or ignite and cause serious injury if
exposed to abuse conditions.
• Do not use the battery if there is visible damage.
• Do not use the battery after strong shock or vibration occurs.
• Do not expose the battery to fire.
• Keep the battery at temperatures less than 60 ºC (140 ºF).
• Keep the battery dry and away from water.
• Prevent contact between the positive and negative battery terminals.
• Do not let unauthorized persons touch the battery.
• Discard the battery in accordance with local, regional and national regulations.
Install the battery
W A R N I N G
Fire and explosion hazard. This equipment contains a high energy lithium battery which can ignite and
cause fire or explosion, even without power. To maintain the safety provided by the instrument
enclosure, the instrument enclosure covers must be installed and secured with the supplied hardware.
W A R N I N G
Explosion and fire hazard. Battery substitution is not permitted. Use only batteries that are supplied by
the instrument manufacturer.
Install the supplied lithium battery as shown in Figure 3 .
6 English