Hydro-Air P-38
Advanced Operation
pH / ORP Analyzer
17
6.7.
Simulator Settings
DISPLAY
FUNCTIONS
Simulator is used to simulate and
verify the condition of the current
output, Relay A and Relay B. The
simulation stops after the user
exits the screen.
4-20mA:
Set the simulation value for current output.
Press
ENTER
to inject the output signal to
multimeter or other related testing kit
Range : 4.00 to 20.00mA
Relay A:
Inject ON/OFF signal to energize/deenergize
Relay A manually
Relay B:
Inject ON/OFF signal to energize/deenergize
Relay B manually
6.8.
Language Settings
DISPLAY
FUNCTIONS
Mode:
Set the preferred language
