49-20-5130 – www.balboawatergroup.com – July 2009
Whirlpool Ozonator 20-5130
Specifications
Rated voltage:
230 Vac
Ozone @ airflow:
50 mg/h @ 2- 10 l/min
Rated current:
300mA
Rated power:
4W
Dimensions
Weight: 0.125
kg
Length: 110
mm
Width: 41
mm
Depth: 53
Important
Follow the directions for installation and connection. The ozonator is not suitable for medical use. We
reserve the right to change the product and the specification without notice.
Safety rules
A. Install the ozonator in a dry and well-ventilated place.
B. Mount the ozonator at least 3 cm above the floor with suction pointing downwards.
C. Before cleaning, servicing, exchanging parts or accessories, or checking up on various disturbances,
the mains have to be cut off.
D. Cables and wires must be a short as possible.
E. The ozonator is designed to comply with Safety Class III and must be electrically connected only in
accordance with EN 60335-1 and EN 60335-2-60. We recommend that you consult a certified
electrical engineer.
F.
Keep at all times minimum 20 mm distance between high and low power cables.
G. The installation should be carried out so that it is impossible for the user to touch the ozonator.
H. The electric parts have to be mounted in such a way that they cannot fall into the bathtub.
I. Do
not
earth the ozonator.
Important
-
All electrical connections must be carried out according to the relevant country's laws on electrical
installation of whirlpools.
-
During installation and testing, make sure to avoid breathing ozone in concentrated form from the
outlet branch socket on the ozonator, as this is harmful to humans as well as animals.
-
Never activate the ozonator as a separate unit. Ozone can be recognised by its characteristic,
slightly "pricking" odour.
-
Ozone is a highly unstable and aggressive form of oxygen that immediately bonds with impurities in
the bath water, which is cleansed in this manner. At the same time the ozone will be "consumed"
and will not bubble up out of the surface of the water in any harmful quantity.