7
2.
Water Pressure & Flow Requirements:
The solution pump providing the water pressure to operate the CX-15 requires the following:
Adjust your system solution pressure for the best cleaning performance on the type of carpet you will
be cleaning.
Required Pump Flow & Pressure: 1.80gpm @ 800psi
Recommended pressure for Residential Spray Bar on Cut Loop Carpet – 400psi
Recommended pressure for Commercial Spray Bar of Closed Loop Carpet – 500-800psi
Operation with a lower pressure setting will slow the Spray Bar rotation and may require more
time to clean the carpet properly.
Operation with a higher pressure setting may cause the Spray Bar to spin too fast, exceeding the
recommended operation speed of the swivel. The increased agitation at higher pressures may
damage carpet fibers.
CAUTION:
o
Exceeding the recommended pressure may cause damage to carpet fibers.
o
Exceeding the recommended pressure may over spin the jet bar and damage the swivel.
3.
Connection of Solution Hose:
Connect the solution hose from your
extractor to the 1/4” Male Quick
connect on the Spray Gun Assembly on
the right side handle of the CX-15.
4.
Connection of Vacuum Hoses:
Connect the vacuum hose from your
extractor to the 2” Vacuum pipe on the
handle of the CX-15. A 2” cuff is
recommended and will fit over the
outside of the pipe. A 1-1/2” cuff can
be used. It will fit inside the pipe, but
may not seal as well.
5.
Adjusting The Handle Stop:
The Handle Stop can be adjusted to set the
CX-15 handle height for comfortable
operation.
Loosen the Handle Stop Wing Nut.
Turn the Handle Stop Bolt IN or OUT as
needed to change the position of the handle
when the Handle Stop Bolt contacts the
Handle Stop on the CX-15 Main Body. The
CX-15 Handle should be adjusted such that
your arms are in a comfortable position
while keeping the CX-15 head level and the
Glide Plate on the carpet while pulling the
CX-15 back during each cleaning pass. Once
set, tighten the Handle Stop Wing Nut to
lock the Handle Stop Bolt in place.
CONNECT SOLUTION HOSE HERE
CONNECT VACUUM HOSE HERE
HANDLE STOP WING NUT
HANDLE STOP BOLT
MAIN BODY HANDLE STOP
