12
Cleaning the Solution Filter:
A dirty or clogged Solution Filter on the CX-15 will reduce the flow rate of water to the spray jets. This will
reduce the cleaning effectiveness of the CX-15 and prevent the Spray Bar from spinning at the proper speed.
The Solution Filter Screen NA0803 is in the Filter Body NA0802, between the 1/4” Male Quick Connect
AH102B and the Filter Adapter NA0804.
To remove the Solution Filter use a 13/16” wrench to hold the Filter Adapter and an 11/16” wrench to turn
the Filter Body.
Usually the filter screen will fall out or is easily pulled out of the Filter Body. If extremely dirty, you may need
to pry the filter screen out with a small flat head screwdriver.
Washout the filter screen or use an air gun to blow the debris off of the screen. If the screen is damaged it
should be replaced.
Place the Filter Screen back into the Filter Body. Apply Teflon Tape to the male threads of the Filter Body
and screw it back into the Filter Adapter and use your 13/16” & 11/16” wrenches to tighten the fittings.
Test the CX-15 operation before returning to service.
FILTER ADAPTER – NA0804
FILTER BODY – NA0802
1/4” MALE QUICK CONNECT – AH102B
FILTER ADAPTER – NA0804
FILTER BODY – NA0802
FILTER SCREEN – NA0803
1/4” MALE QUICK CONNECT – AH102B
