HydrINS 2 / HydrINS 2 Mini flow meter
Installation Manual
Page 6 / 79
1
Safety instructions
For the flow meter and its display unit to operate properly and safely, they must be transported,
stored, positioned and assembled in accordance with precise rules, and must be used and
maintained with care. This equipment must be installed and used exclusively by qualified
personnel.
No alterations to the equipment are permitted, including opening it or making inappropriate
modifications.
If this instruction is not obeyed, the CE marking and the guarantee will cease to be valid.
This equipment includes lithium batteries, which can cause a hazard if misused. Obey the
following rules:
Do not short-circuit or charge the batteries or reverse the polarity.
Do not expose the batteries to temperatures outside the specified range. Do not
incinerate them.
Do not crush, puncture, or open the cells. Do not disassemble the battery packs.
Do not solder the body of the batteries.
Do not expose the batteries or packs to water.
When returning the devices for calibration or maintenance:
Lithium batteries are classified as dangerous goods in accordance with dangerous goods
regulations UN 3090 and UN 3091. These directives impose the use of special transport
documents.
In accordance with EC Directive 2006/66/EC, batteries must not be disposed of with domestic waste.
NOTE: Must not be used in explosion-hazard areas!
Devices used in explosion-hazard areas must be Ex approved and marked as such. This device
is not approved for use in explosion-hazard areas!