HydraMaster 000-163-012, Owner'S Manual, Page: 9 / 28

2-1: Operating Instructions
2 - Operating Instructions
your DriMaster HiFlo Upholstery Tool has been engineered using the latest and most
sophisticated technology available to produce the finest upholstery cleaning results
possible. Despite this, it remains only a tool of the upholstery cleaning trade and can
produce only as a good a job as the person operating it.
HydraMaster / U.S. Products strongly recommends attending an Institute of
Inspection, Cleaning and Restoration Certification (IICRC) approved Upholstery
Cleaning course as soon as possible and to always follow the IICrC guidelines
when cleaning.
OPTIOnAl ACCESSOrY HAnDlE ASSEMblY
The DriMaster HiFlo Upholstery Tool can be equipped with an optional accessory handle
(purchased separately) to increase comfort and control during difficult or extended
repetitious use of the upholstery tool.
Remove the two screws, nuts, and washers 1.
found on the handle grip portion of the tool
(Figure 2-1). These parts will be reused in
fastening the handle.
Attach the accessory handle as shown in 2.
Figure 2-2. The original shorter screws, nuts,
and washers are used on the upper handle.
The longer supplied screws, nuts and washers
are used to connect the handle to the tool
body.
Remove Tool
Figure 2-1.
Screws
Attach Accessory Figure 2-2.
Handle
Original
Screws
(Supplied) long Screws