HydraMaster 000-163-012, Owner'S Manual, Page: 10 / 28

Operating Instructions: 2-2
bEgIn ClEAnIng
Do not use the DriMaster HiFlo Upholstery Tool on a machine exceeding 14” Hg
vacuum and 500 psi solution pressure. Personal injury could result.
Attach the solution hose to the solution quick connect. A 1 ½” - 2” vacuum hose can 1.
be attached to the vac hose manifold (see Figure 2-3).
Adjust the water volume by turning the solution control knob. Turning the knob 2.
counterclockwise increases the water volume; turning the knob clockwise decreases
the water volume. The amount of water volume you need will vary with the type of
machine you are cleaning with and the type of material you are cleaning.
To begin adjustment, make sure the cleaning machine is running and both vacuum
3.
and solution hoses are connected.
Slowly open the solution control knob until water is flowing across the entire bar jet
4.
(without overspray).
Attach Solution Hose and Adjust Water Volume Figure 2-3.
Solution bar Jet
Solution Control Knob
Solution Quick
Connect
Vac Hose Manifold