USB interface
SensorMonitoring Unit - SMU
en(us)
Page 73 / 100
BeWa SMU1200 3854281 V2.0x en(us) 2013-08-20
2013-08-20
USB interface
Copying measurements onto a USB data stick
Compatibility with other USB memory sticks on the market
cannot be guaranteed as the SMU communicates directly with
the microprocessor. This means that communication errors can't
be corrected in software, as on a PC with an operating system.
We recommend using the HYDAC USB
memory stick included in delivery, which we
successfully tested for many PC/operating
system combinations.
On page 96. you will find an overview of
additional tested USB sticks.
We accept no liability for the functionality
and compatibility of the USB memory
stick with your system. We do not offer
support or replacements in this case.
(diagram similar)
HYDAC p/no 3442973
Saved measurements can be backed up on the USB memory stick supplied
with the unit. Note that all of the measurements stored in the SMU 1200
internal memory will be copied to the USB memory stick. After copying to the
USB stick, the data still exists in the internal memory.
During the download, no measurement data are stored in the internal
memory. After another download, the measuring data are missing for the
duration of the download.
You have to explicitly delete the data in the internal memory of the SM 1200.
See the DEL.MEM menu option on page 56.
Before using the USB stick for the first time, we recommend that you format
it. To do that, insert it into a free USB port on your PC. Then change to the
file manager (e.g. Explorer) and format the stick in FAT32 format. You will
find details of this in the documentation of your operating system.
There must be at least 10 MB of free memory available on the USB memory
stick.
In order to be able to copy data to the USB memory stick, the
REC.MOD must be set to the setting with which the data can also
be recorded.
