Configuring the SMU
SensorMonitoring Unit - SMU
en(us)
Page 66 / 100
BeWa SMU1200 3854281 V2.0x en(us) 2013-08-20
2013-08-20
REC.TIM – Set recording interval
Under REC.TIM, set the time interval at which the current measured value of
the connected sensors is stored in the SMU memory.
Select the duration in the range from 10 to 3600 seconds.
Use the following buttons to set the
duration of the measurement.
To change digit
To change the value
o.k.
To confirm the change
Esc
Cancel and back
60
Factory setting:
60 seconds
