5 | Mounting/installing
HYDAC FILTER SYSTEMS GMBH
34 / 64
MoWa OLFP-1-T002 4469047 en-us lq
Make sure that no stresses or vibrations are transmitted to the
filter housing. Use hoses or expansion joints if necessary.
Fig. 12:
Observing the removal space
Make sure there is adequate removal space (X) for changing
the filter element. In order to make the filter element change
easier, install shut-off devices in the immediate vicinity of the
filter housing (B).
Summary of Contents for OLFP-1
Page 64: ......
