HYDAC FILTER SYSTEMS GMBH
Performing Maintenance | 8
BeWa MFU-10P 4391553c en-us web
91 / 120
8.4.2 Removing/installing the push-in protective screen
1x screwdriver
= 16x2 mm
Fig. 30:
Removing/Installing the push-in protective screen
For disassembly, proceed as follows:
ü
Switch off the filter unit and remove the lance from the
reservoir and/or close the shut-off device in order to
prevent any subsequent flow of the medium.
1.
Disassemble the suction hose ahead of the inlet
connector.
2.
Use the screwdriver
= 16 x 2 mm to screw the
protective screen (711) out of the connection in counter-
clockwise direction.
3.
Remove the O-ring (712).
O
Disassembly of the protective screen is complete.
1
2
3
4
5
6
7
8
9
A
Summary of Contents for MFU-10P9S Series
Page 120: ...www hydac com ...
