Hydac MFU-10P9S Series, Operating And Maintenance Instructions Manual

Page: 62 / 120

6 | Manual operation HYDAC FILTER SYSTEMS GMBH
62 / 120 BeWa MFU-10P 4391553c en-us web
6.3 Selecting the operating modes
Select the optimal operating mode for your requirement. In
order to do this, use a suitable filter element (900) or an empty
element (910)
.
Details for insertion or exchanging this can be
found in Chapter Changing the filter element [
}
80] . Suitable
filter elements can be found in Chapter Finding the filter
elements [
}
105] .
You will find further details on the operating modes in the
subsequent chapters.
900 Filter element
910 Empty element
In this context, ensure that:
- The suction hose suctions as close to the bottom of the
reservoir as possible, however not directly at the base.
- The pressure hose allows the cleaned oil to flow back into
the reservoir, as far as possible at the top of the reservoir,
but below the oil level, without the oil being enriched with
air.
1
2
3
4
5
6
7
8
9
A