Hydac LVH-CD 1240, Installation And Maintenance Instructions Manual

Page: 33 / 52

HYDAC FILTER SYSTEMS GMBH Installation / Assembly | 5
MoWa LVH-CD-AWD 4650237 en-us web 33 / 52
5.3 Electrical installation
For the electrical installation, proceed as follows:
DANGER
Danger from electrical voltage
Danger of fatal injury
u
Work on the electric supply may only be carried out by a
properly trained, certified electrician.
u
Before carrying out any work, disconnect the power plug
or deenergize the unit.
ü Compare the voltage and frequency specifications on
the type label with the specifications for the available
network.
ü
The switch box is fastened, for details, see Fastening
the switch box [
}
28] .
1. Hook up the power supply according to the accompany-
ing wiring diagram.
2. Connect the connection cable with connection socket to
the water sensor.
3. Connect the connection cable to the solenoid valve.
O The electrical installation is completed.
1
2
3
4
5
6
7
8
9
A