Hydac FluidAqua Mobil FAM 15 Page 16 Operation Instructions Manual Download

Page: 16 / 68

FAM 15/30/50/70

Transporting the FAM

HYDAC Filter Systems GmbH

Page

16 /

BEWA FAM15-70Siem 3099574e en 2009-10-08.doc

2008-10-06

Transporting the FAM

CAUTION

High empty weight
(

≈

400 … 850 kg, depending on the version)

Bodily injury

►

Use at least 2 persons to shift the FAM.

NOTICE

Using components for pushing / pulling

The FAM will be damaged

►

Never use the components to push or pull the FAM.

►

Use the grips provided for shifting.

Drain the unit completely before transport. Seal off the inlets and/or outlets.

On the mobile FAM, wind the suction and pressure hose and the connection cable
around the holders provided for this purpose and fasten them in place.

Shift the FAM manually using the rollers. When doing so, use only the grips
provided on the FAM frame for pushing.

Before shifting the unit, make sure to release the hand brake on the steering rollers.

Once the FAM is in its new position, actuate the hand brake on the steering rollers.

Fork lift

Use the lift eyes when transporting the unit with a forklift.

Summary of Contents for FluidAqua Mobil FAM 15





































































Search results

Summary of Contents for FluidAqua Mobil FAM 15

Reviews:

Related manuals for FluidAqua Mobil FAM 15

Brands by name

Popular brands

Hydac FluidAqua Mobil FAM 15, Operation Instructions Manual

Search results

Summary of Contents for FluidAqua Mobil FAM 15

Reviews:

Related manuals for FluidAqua Mobil FAM 15

Brands by name

Popular brands