Hydac Filtromat OF5 C with FCU Operating And Maintenance Instructions Manual Download Page 10 | Manualshive

Page: 10 / 44

Hydac Filtromat OF5 C with FCU Operating And Maintenance Instructions Manual Download Page 10

Safety information and instructions

Filtromat – OF5 C with FCU

en(us)

Page 10 / 44

BeWa OF5C 3160333b en-us 2014-07-28.doc

2014-07-28

Proper/Designated Use

Use the unit only for the application described in the following.
The mobile filtration unit is designed to fill/filter hydraulic & lubrication tanks
and to filter offline whereby the contamination can be monitored. It is also
designed for pumping out unfiltered hydraulic and lubrication oils, and
draining hydraulic tanks.
During this work, the integrated FluidControl Unit measures particulate solid
particle contamination in order to monitor and document the oil cleanliness.
Proper or designated use of the product extends to the following:



observing all instructions contained in the instruction manual.



performing inspection and maintenance work.

NOTICE

Impermissible operating media

The unit will be damaged

►

The unit is only to be used with mineral oils or mineral oil-based
raffinates.

«
...
8
9
10
11
12
...
»

Summary of Contents for Filtromat OF5 C with FCU













































Reviews:

No comments