HYDAC FILTER SYSTEMS MFU-15E Operating And Maintenance Instructions Manual Download Page 11

Page: 11 / 120

HYDAC FILTER SYSTEMS GMBH

General | 1

BeWa MFU-15E_S 4391552c en-us web

11 / 120

1.2.6 Signal words and their meaning in the general

safety information

In these instructions you will find the following signal words:

DANGER

DANGER – The signal word indicates a hazardous situation
with a high level of risk, which, if not avoided, will result lethal
or serious injury.

WARNING

WARNING – The signal word indicates a hazardous situation
with a medium level of risk, which, if not avoided, can result
lethal or serious injury.

CAUTION

CAUTION – The signal word indicates a hazardous situation
with a low level of risk, which, if not avoided, can result in mi-
nor or moderate injury.

NOTICE

NOTICE – The signal word indicates a hazardous situation
with a high level of risk, which, if not avoided, will result in
damage to property.

Summary of Contents for MFU-15E

























































































































Search results

Summary of Contents for MFU-15E

Reviews:

Related manuals for MFU-15E

Brands by name

Popular brands

HYDAC FILTER SYSTEMS MFU-15E, Operating And Maintenance Instructions Manual

Search results

Summary of Contents for MFU-15E

Reviews:

Related manuals for MFU-15E

Brands by name

Popular brands