HYDAC FILTER SYSTEMS GMBH
Decommissioning / Disposal | 9
BeWa MFU-15E_S 4391552c en-us web
101 / 120
9 Decommissioning / Disposal
In the following chapters, you will be provided with information
regarding temporary shutdown/final decommissioning and dis-
posal of the product.
9.1 Temporary shutdown
If the product is being temporarily shut down, the following
measures are adequate:
1.
Switch the product off and disconnect it from all sources of
energy.
2.
Follow all the notices in the
Transport/storage chapter
9.2 Final Decommissioning
If the product is to be finally decommissioned, proceed as fol-
lows:
– Empty the product fully, including all the components, be-
fore decommissioning.
– Fully disconnect the product from the surrounding units.
– Slacken or remove the electric, pneumatic or hydraulic
connections insofar as they are present.
9.3 Disposal
Dismount and recycle the product that cannot be used any
more, not as a whole unit, but in individual parts and according
to the kind of the materials. Dispose of the product after it has
been dismantled and all the parts have been separated into
their various material categories, then dispose of all parts in an
environmentally friendly manner.
Dispose of the dismounted individual parts/drained operating
fluids/fluids in an environmentally friendly manner. Follow the
respective national regulations.
1
2
3
4
5
6
7
8
9
A
Summary of Contents for MFU-15E
Page 119: ......
Page 120: ...www hydac com ...
