HYDAC FILTER SYSTEMS MFU-10P9S Series, Operating And Maintenance Instructions Manual

Page: 66 / 124

7 | Manual operation HYDAC FILTER SYSTEMS GMBH
66 / 124 BeWa MFU-10P 4391553b en-us
7.3.1 Recirculation with filtration/dewatering
For the operating mode recirculation with filtration orrecircula-
tion with filtration/dewatering use the respective filter element
(900) with the required filtration rating. An overview of the
available filter elements with their filtration rating (900) can be
found in Chapter Finding spare parts/accessories [
}
103] .
Fig. 23: Filter element
Fig. 24: Example of application: Recirculation with filtration/dewatering
ü Select the right filter element for an operating mode and
exchange this according to Chapter Changing the filter
element [
}
82] .
1. Connect the suction hose to the oil tank/container and fit
the suction hose in it and also secure it against falling
out.
2. Connect the pressure hose to the oil tank/container and
fit the pressure hose in it and also secure it against fall-
ing out.
3. Connect the filter unit to the voltage source.
4. Switch the filter unit on at the main switch.
1
2
3
4
5
6
7
8
9
10
A