3
2. Installation
Wall Mounting
•
Do not install in areas where there is a risk of water freezing in the heater.
•
Do not install the heater where the consequences of a leak could be unusually
severe. (eg above computer equipment)
•
When choosing a location for the heater, consider the visibility of any leak that
might arise. This is particularly important when locating in a concealed area such
as a cupboard.
•
The heater must be mounted horizontally with the inlet and outlet connections
at the bottom of the heater (see diagram below).
Flow
HOT
OUTLET
HOT TAP
SERVICE VALVE
COLD MAINS
SUPPLY
L
N
E
PCB
RELAY
THERMAL
CUT OUT
TANK
TRIAC
230mm
380mm
90mm
70mm
IN96T_Layout 1 08/06/2015 16:12 Page 3
