SIP-6002 User Guide
4
OUT
Press this key to look over outbound NO. in 6 recently.
CHECK
Press this key to gain the NO. from M1-M9.
UP/DOWN
Press this key to turn over the inbound NO. in 4 recently.
BACK
Press this key to quick dail the outbound NO. in 1.
RECALL
Press this key to gain the NO. from M1-M9.
HOLD
Press this key to hold a calling.
PAUSE
Press this key to pause a calling.
FlASH
Quick cut off the call.
2.3 IP Phone Back and Side Illustrations:
A:
Phone port, you can connect an phone.
B:
Line port, connect to PSTN line.
C:
RJ-45 port, connect to LAN.
D:
Connect to power line.
Please make sure you have the following items in the product package you received,
IP-Phone 100 IP phone
5V power supply
In addition, you need,
A Cat-5 Ethernet cable
An Ethernet port connecting to IP networks
Please follow the instruction below for IP phone setup:
Insert one end of Cat-5 Ethernet cable to “LAN” port on the back of IP phone
and the other end to Ethernet port connecting to IP networks.
Insert 5V power supply cable into the power plug of IP phone.
Check and confirm all connections are correct.
Now you can power on the 5V power supply.
