Hy-Brid Lifts PA-1030, Operation & Safety Manual

Page: 8 / 36

SECTION 2
SAFETY
2.1 | SAFETY SYMBOLS
FAILURE TO FOLLOW THIS WARNING WILL CAUSE
DEATH OR PERSONAL INJURY.
"DANGER" indicates an imminently hazardous
situation, which, if not avoided, will result in
death or serious injury.
FAILURE TO FOLLOW THIS WARNING MAY CAUSE
DEATH OR PERSONAL INJURY.
“WARNING” indicates a potentially hazardous
situation, which, if not avoided, could result in
death or serious injury.
FAILURE TO FOLLOW THIS WARNING MAY CAUSE
INJURY OR DAMAGE TO EQUIPMENT.
“CAUTION” indicates a potentially hazardous
situation which, if not avoided, could result
in minor or moderate injury or damage to
equipment.
2.2 | GENERAL RULES AND PRECAUTIONS
An operator of any type of work platform is subject to certain hazards that cannot be protected by mechanical
means. It is therefore essential that operators be competent, careful, physically and mentally fit, and
thoroughly trained in safe operation of this machine.
Although Custom Equipment, LLC conforms to specified ANSI, OSHA and CSA, it is the responsibility of the
owner to instruct operators with the safety requirements made not only by Custom Equipment, LLC, but
by the various safety boards in your area, as well as additional requirements set forth by ANSI and OSHA, or
CSA. If you come across a situation that you think might be unsafe, stop the platform and request further
information from qualified sources before proceeding.
DO NOT OPERATE MACHINE NEAR POWER LINES.
THE PLATFORM AND ENCLOSURES ARE NOT
INSULATED. EQUIPMENT IS ONLY AS SAFE AS THE
OPERATOR.
NEVER REACH BETWEEN SCISSORS LINKS OR PROP
UP PLATFORM.
PUSH-AROUND SERIES PA-1030 8