FIGURE 12: Battery Charger LED Display
Battery solution is at its proper strength when the battery is manufactured. Use distilled water and keep fluid up to
proper level. When required, water should be added to battery after charging, unless water level is below the plates.
Reading the battery displays
This display indicates that the power is on but there is no connection to a
battery. The charger must see approximately five (5) volts on a battery to
deliver D/C current.
This display indicates that power is on and that both outputs are delivering
D/C current to the batteries
This display indicates that power is on and that the output is finished
charging and is in a float maintenance model.
SECTION 6 | DAILY MAINTENANCE
POWER
BATTERY 1 STATUS
CHARGING READY
Green LED
(ON)
Red LED
(OFF)
Green LED
(ON)
Green LED
(ON)
Red LED
(ON)
Green LED
(OFF)
Green LED
(ON)
Red LED
(OFF)
Green LED
(ON)
POWER
BATTERY 1 STATUS
CHARGING READY
POWER
BATTERY 1 STATUS
CHARGING READY
OPERATIONS & SAFETY
HB-P527
SUPO-723
REV C
BY CUSTOM EQUIPMENT LLC
19
