HW group
8
First start-up
First step
Cable connection
•
Connect the device to the
Ethernet
(direct cable to the
switch
, crossed to PC).
•
Connect the power adapter to the grid and connect it to the device power supply connector.
•
The green LED in the
Power & Mode
RJ45 connector will light up.
•
If connection to the
Ethernet
, is functional, the
LINK
(yellow) LED should light up shortly afterwards
and switch off during data transfer to the Ethernet (Activity signalisation).
•
A quickly flashing yellow
LINK
LED signalises communication with the DHCP server.
Setting of the IP address - HWg-Config
The
HWg-Config
program is located in the main director on the enclosed CD (version for Windows
and Linux).
The program can be downloaded at www.HW-group.com Software -> HWg-Config.
• Click on the icon to launch the
HWg-Config
program – the program automatically searches for
connected devices.
• Launch the search by clicking on the
Find Devices
icon.
• The program searches for devices in your local network. Click on the MAC address of the device
to open the dialogue window for device settings.
1
2
STE2 – User Manual
Summary of Contents for STE 2
Page 1: ...User Manual...
Page 43: ......
