HW group
20
Alarms tab
Alarm targets are defined at this tab. Up to 2 sets of targets can be created; each set can contain
up to 2 addresses for e-mail alerts and 2 phone numbers for text message alerts and calls. These
sets are then assigned to individual sensors and digital inputs. To create a set, click the + button
at the Alarms tab, or select Add new... when editing a sensor or a digital input.
Alarm Target
Set of targets. For clarity, the set can be given a custom name.
•
Email list
– E-mail addresses of alarm alert recipients. To send e-mails, the SMTP server must
be properly configured at the Email tab.
•
Email address
– Each field may contain only one e-mail address.
•
SMS list
– Phone numbers for text message alarm alerts. To send a message, the SMS gateway
must be properly configured at the SMS tab.
•
Phone number
– Each field may contain only one phone number.
•
Call
– When checked, the phone number is dialed after the text message is sent (an incoming
text alone can be easy to overlook).
STE2 – User Manual
Summary of Contents for STE 2
Page 1: ...User Manual...
Page 43: ......
