HW group
2
Safety warning
Safety warning
The device meets the requirements of standards valid in the Czech Republic, has undergone live
testing and is delivered in operational condition. To maintain the device in this condition, it is
necessary to observe the safety and device maintenance requirements set forth below.
If the device is not used in the manner recommended by the manufacturer, the security offered
by the device may be breached!
The power socket or point of disconnecting the device from power supply must be freely accessible!
The device must not be used in particular if:
• it is visible damaged
• it does not work properly
• there are loose parts inside the device
• it was exposed to long-term humidity or got wet
• it underwent unqualified repair by unauthorised personnel
• the power adapter or its supply cable are visible damaged
• if the device is used in a manner other than the designated manner, the protection provided
by the device may be breached
• the switch or fuse and other power surge protection resources must be part of the overall
construction unit
The manufacturer is liable for the device only if it is powered by the supplied or approved power source.
Should you have any problems with installation and start-up, you can contact our technical support:
HW group s.r.o.
http://www.hw-group.com
email: [email protected]
Rumunská 26/122
Prague, 120 00
Phone: +420 222 511 918
Before contacting technical support, prepare the precise model of your device (on the manufacturing label
and the firmware version (see below), if you know it.
Summary of Contents for STE 2
Page 1: ...User Manual...
Page 43: ......
