HW group
10
WWW interface
Home tab
Base Information section
•
Device Name
– The device name serves to distinguish specific devices in larger installations. Can
be set in the General Setup tab.
•
Time
– Current device time. The time can be set automatically from the internet or manually
in the Time tab. In the case of automatic setting, the correct value is the indicator of device
access to the internet.
•
Date
– Current device date. The date can be set automatically from the internet or manually
in the Time tab. In the case of automatic setting, the correct value is the indicator of device
access to the internet.
Sensors & Digital Inputs section
Lists the current values of sensors and digital DI inputs (Dry contacts)
•
State
– Input or sensor state.
•
Normal
– Idle state, all normal.
•
Alarm High
– Value exceeded the permitted upper limit.
•
Alarm Low
– Value dropped below lower bottom limit.
•
Alarm
– Digital input in the Alarm state (according to the Alarm Alert setting at the Digital
Inputs tab).
•
Name
– Sensor name for better identification in larger systems. The name can be set in the
Sensors or Digital Input tab.
•
Type
– Sensor type; indicates what type of sensor is in question (temperature / humidity / digital
input).
•
Current Value
– Current value including unit of measure.
STE2 – User Manual
Summary of Contents for STE 2
Page 1: ...User Manual...
Page 43: ......
