18
HFR-8000 Operator
’s Manual for Remote Tracing
5. Operation
5.1 Command Buttons
Frame Material
Selection of Frame Material
·
METAL
·
PL-HARD
(Hard Plastic)
·
PL-SOFT
(Soft or flexible Plastic)
Before tracing a frame, choose one of the
material types that is used by the edger for
such as predefined size adjustment.
Selection of Pattern Tracing Mode
·
LO CURV
(2D Tracing)
·
HI CURV
(3D Tracing)
When the Pattern Holder is loaded in the
Frame Reader, it automatically recognizes
the pattern tracing mode.
☞
When tracing a demo lens of higher curve, using
the HI CURV mode could give more precision in
the size
.
Menu
Menu Selection
·
CONFIG
(System Configuration)
☞
Refer to the section 6.1
Configuration of Frame Reader
·
CALIB
(Automatic Calibration)
☞
Refer to the section 7.1 Automatic
Calibration of Frame Reader
·
ETC
(User Preferences)
☞
Refer to the section 6.2 User
Preferences of Frame Reader
