46
Excelon EZ Operator’s Manual
5.4.10 Retouching
If you need the size adjustment after finishing the lens edging, change the retouch
size value. Be sure that retouch will be only executed after finishing the lens edging.
After finshing the lens edging, retouch size
icon selected automatically.
Use [-]/[+] buttons to adjust retouch size
value.
And then press the [RETOUCH] button to
start retouching(Do not confuse [RETOUCH]
button with [START] button).
!
NOTE
•
Be sure not to remove the lens adapter to retouching.
•
In case the operator made an error not to activate polishing, the operator can
execute polishing by way of pressing the polishing button.
•
If the operator change the options other than polishing, retouch feature will be
disabled.
•
The recommended retouch size will be 1/3 of the length shown as (a).
(a)
