Huvema HU 50 H, Operation Manual, Page: 5 / 37

5
1.1.28 Keep your hands away from the turning parts of the machine during
operation.
1.1.29 Do not remove the chips directly by hand, It is safer with proper tool to
remove the chips. Be sure to stop the machine when removing chips from the
machine.
1.1.30 Prior to starting test operation, read this manual carefully so as to be
familiar with this machine.
1.1.31 Contact the manufacturer if for some reason the OPERATION MANUAL
should become unreadable.
1.2 Additional Safety Rules for Mills
1.2.1 Read and understand the entire instruction manual before operating the
machine.
Warning: Failure to follow the instruction will result in serious injury.
1.2.2 Always wear approved safety glasses/suit while operating machine tool.
1.2.3 The machine must be grounded.
1.2.4 Before operating the machine, remove tie, rings, watches, other jewelry,
Keep the sleeves and the edges of the work uniform tight. Always be sure to
wear safety goggles and wear safety shoes during operation. Do not wear gloves
while operating machine tool.
1.2.5 Keep the floor around the machine clean and away from scrap materials, oil
and grease, etc.
1.2.6 Keep all guards of the machine securely in place at all times when working.
For maintenance purpose, use extreme caution to replace the guards immediately
after maintenance.
1.2.7 Make sure workpiece and cutter be fitted and clamped well, and make sure
the cutter doesn't touch the workpiece before starting up the machine.
1.2.8 Must shut off power supply before adjusting or maintaining the machine.
1.2.9 The operator must keep clear-minded when operating the machine and pay
attention to what he is doing. It is not allowed to operate the machine when the
operator is tired, after drinking or taking medicines.
1.2.10 Use tools properly. Don't force a tool or an attachment to do work which
was not designed. Sharp tools should be used. Deformed or dull tools should not be
used.