Huvema HU 50 H, Operation Manual, Page: 13 / 37

13
6.8 Vertical feed of table
6.8.1 Vertical manual feed of table: First loosen locking handle (12), adjust the
handle (17) in “NEUTRAL” position, then turn handwheel (18) directly to realize
vertical manual feed of table.
6.8.2 Vertical power feed of table: First loosen locking handle (12), adjust the
handle (17) up or down, which will realize the vertical power feed.
WARNING: Must take off the crank handle (18) when crank handle (18) is not
used.
6.9 Swivel table
First loosen the locking screw (20) at two side of the revolving bed, then turn the
table forcibly in target position, tighten the locking screw (20) finally.