Huvema HU 175 P, Operation Manual, Page: 12 / 22

-11-
Additional safety rules
Always keep in mind that:
- the machine must be switched off and disconnected from the power supply during maintenance and repairs,
- clamped workpieces may only be measured when the machine is switched off.
Never lean over the machine, mind loose clothing, ties, jewellery etc. and wear a cap.
Do not remove safety devices or guards. Never use the machine while a guard is open.
Always use safety glasses for machining rough materials.
Burrs and chips should only be removed using a sweeper or other aid, never with your bare hands!
Never leave the machine running unattended.
2. Characteristics and applications
Dimensions polishing brush...................................................................................................... 175 x 15 x 19 mm
Speed range ........................................................................................................................................ 2850 RPM
Motor power ............................................................................................................................................. 0.45 kW
Packaging dimensions ......................................................................................................... 630 x 175 x 250 mm
Weight .......................................................................................................................................................... 16 kg
Subject to change.
3. Instructions for using this machine
Read the safety rules carefully and always observe them. Examine the applications of this machine and
beware of possible risks.
Always wear safety glasses.
4. Uitpakken en de inhoud controleren
See Figure 1 and 2
On receipt, carefully unpack the components ensuring that no damage was suffered in transit and that all parts
are accounted for.
C1 Polishing brush (2x)
C3 Flange
(4x)
C4 Hex. screw
C5 Hex. screw with left thread
4.1 Installing the machine
See Figure 3
1 Polishing brush I
2 Working area I
3 Switch
4 Stand
(optional)
5 Polishing brush II
6 Working area II
7 Supply cable
To increase safety while working, it is recommended to use a workstand.