garden and landscaping products
H
H
UTTO
UTTO
N
N
Assembly Instructions
WYC
– Circular Picnic Table
1. Please allow enough time and be patient when assembling
your table.
2. Sort out all components as sketch before you start.
3. Place the table top upside down on a flat surface, taking care
to protect the top from scratching.
4. Take each leg in turn and assemble to top as shown on sketch,
push caps into the leg, passing bolt through block and screw
into leg. Do not tighten completely at this stage.
5. Repeat for all four legs.
6. Take the two cross rails (Type A) and fit to legs as shown in
sketch.
7. Repeat for other two cross rails (Type B). Pass bolts through
cross rails and legs into cap in outside of cross rail. Do not
tighten completely at this stage. Note: Small rebates face
inwards to support parasol.
8. Slot seats, face down, between cross rails and pass long bolts
through rails and seat battens and screw into rail caps. Do
not fully tighten at this stage.
9. Repeat for all four seats.
10. Select two braces and position as sketch. Pass a 60mm bolt
through brace and screw into insert on seat.
When assembling, loosely
bolt together until fully
assembled then tighten all
the bolts.
List of parts in fixings pack
20 x M8 95 Bolts
16 x M8 60 Bolts
2
8
x M8 25 Caps
2 x Allen Keys
During the treatment process, some
grain may be raised - you can
enhance your table by a little fine
sanding of the edges.
continued overleaf
