HUSTLER SmoothTrak Super S, Manual, Page: 119 / 432

606834CE 2-5 REV A
CZ
DA
DE
EN
ES
FR
IT
NL
PT
SV

Always wear adequate eye protection when:
• servicing the hydraulic system.
• servicing the battery.
• grinding mower blades and removing
accumulated debris.

Never attempt to make any adjustments or repairs to
the mower drive system, mower deck or any
attachment while the mower engine is running or deck
clutch is engaged. Repairs or maintenance requiring
engine power should be performed by trained
maintenance personnel only.

Never work under the machine or attachment unless it
is safely supported with jack stands.
• Make certain machine is secure when it is raised
and placed on the jack stands.
• The jack stands should not allow the machine to
move when the engine is running and the drive
wheels are rotating.
• Use only certified jack stands. Use only
appropriate jack stands, with a minimum weight
rating of 907 kg to block the unit up.
• Use in pairs only.
• Follow the instructions supplied with the jack
stands.

Exercise caution when releasing spring tension from
any of the belt idlers or when working with any of the
deck lift components.

Do not touch hot parts of machine.

Keep nuts and bolts tight, especially the blade
attachment bolts. Keep equipment in good working
condition.

Never tamper with safety devices. Check their proper
operation regularly.

Grass collection system components are subject to
wear, damage and deterioration, which could expose
moving parts or allow objects to be thrown. Frequently
check components and replace with manufacturer’s
recommended parts, when necessary.

Exercise caution when working under the deck as the
mower blades are extremely sharp. Wrap the blade(s)
or wear gloves and use extra caution when servicing
them.

Use original Hustler
®
replacement parts, or parts that
are equivalent in overall performance, that are
available from your local Hustler
®
Dealer.
• The mower may not comply with the appropriate
safety standards if aftermarket parts,
accessories, or attachments are used.
Mower Blade Maintenance Precautions

Never attempt to straighten a bent blade by heating, or
weld a cracked or broken blade as the blade may break
and cause serious injury. Replace worn or damaged
blades.

Never work with blades while engine is running or deck
clutch switch is engaged (on).

Always wear adequate eye protection when grinding
mower blades.

Mower blades are sharp and can cut. Wrap the
blade(s) or wear gloves and use extra caution when
servicing them.
Battery Service Precautions

Battery posts, terminals, and related accessories
contain lead and lead compounds, chemicals known to
the State of California to cause cancer and
reproductive harm. Wash hands after handling.

Charge batteries in a well-ventilated open area, away
from sparks and flames. Unplug charger before
connecting or disconnecting from battery. Wear
protective clothing and use insulated tools.

Avoid skin and clothing contact with battery acid.
• Always wear eye protection when checking the
battery. Acid can cause serious injury to skin and
eyes. If contact occurs, flush area with clean
water and call a physician immediately. Acid will
also damage clothing.
• Do not drink the battery electrolyte.
• Do not allow open flame near the battery when
charging.
• Hydrogen gas forms inside the battery. This gas
is both toxic and flammable and may cause an
explosion if exposed to flame. Always
disconnect
the negative (black) battery cable(s) before
disconnecting the positive (red) cable(s). Always
connect the positive (red) battery cable(s) before
connecting the negative (black) cable(s).
• Do not overfill the battery.
• Electrolyte may overflow and damage paint,
wiring or structure. When cleaning the battery,
use soap and water. Be careful not to get soap
and water into the battery. Clean the battery
terminals with a solution of four parts water and
one part baking soda when they become
corroded.

Shorts caused by battery terminals or metal tools
touching metal mower components can cause sparks.
Sparks can cause a battery gas explosion which will
result in personal injury.
• Prevent the battery terminals from touching any
metal mower parts when removing or installing
the battery.
• Do not allow metal tools to short between the
battery terminals and metal mower parts.

Incorrect battery cable routing could cause damage to
the mower and battery cables. This can cause sparks