Starter
12-volt (.8 kw), solenoid shift positive engagement
Ignition
Electronic
Charging System
12-volt, 15-amp
Fuel
Unleaded gasoline with octane rating of 87 or higher
Fuel Filter
Replaceable, automotive-type
Air Filter
Heavy-duty air cleaner to extend the service interval for
excessive, dirty applications and improved performance
Cooling
Air cooled. Fly-wheel fan
Governor
Mechanical
TRACTION DRIVE SYSTEM
Type
Dual hydrostatic. Individual pumps power two direct-drive
wheel motors. Hydrostatic system operates on 10W40 motor oil.
Transmission drive (oil) cooler for increased system life.
Pumps
Two variable displacement, axial-piston type. Each pump
powers one drive-wheel motor. Mini Z: Hydro-Gear BDP10 Super
Mini Z: Hydro-Gear BDP16
Pump Drive
V-belt drive from engine crankshaft
Hydraulic Lines
Stainless-steel, high-pressure lines with Parker
Seal-Lok™ O-Ring Face-Seal fittings. Hydraulic lines and fittings
guaranteed to never leak!
Final Drive
Direct-drive high-torque wheel motors. One for each
drive wheel. White CE 12
Filter
40 micron, spin-on type
Ground Speed
Infinitely variable
Mini Z: 0-9 mph (0-14.48 kph) forward, 0-7 mph (0-11.27 kph)
reverse. Super Mini Z: Forward 0-13 mph (0-20.92 kph) forward,
0-7 mph (0-11.27 kph) reverse
Steering
Twin-lever SmoothTrak™ steering provides independent
control of each drive wheel. Speed, forward, reverse, brake, and turns
are all controlled with hand-operated controls
Turning Radius
True zero degree. Turns within its own length.
Counter-rotating, independent drive wheels
BRAKES:
Service:
Hydrostatic dynamic braking
Parking:
Automotive-style drum brakes. When steering levers
are placed in neutral position, integral park brakes are
automatically engaged
Mower Drive
Single V-belt drive from engine with electric clutch.
Spring tension idler for extended belt life.
TIRES:
Front:
13 x 5.00 – 6, rib tread
Drive:
23 x 9.50 – 12, turf tread
CAPACITIES:
Fuel System:
12 US gal (45.4 l)
Hydraulic Oil:
2 US gal (7.57 l)
DIMENSIONS:
Height:
40 in (101.6 cm)
W/44 in Deck
Length:
72 in (182.88 cm)
Overall width:
45 in (114.3 cm) with disc. chute up
Tire-to-tire width:
44 in (111.76 cm)
Weight:
985 lbs (446.79 kg)
W/52 in Deck
Length:
75 in (190.5 cm)
Overall width:
53 in (134.6 cm) with disc. chute up
Tire-to-tire width:
44 in (111.76 cm)
Weight:
985 lbs (446.79 kg)
Safety Features
Operator presence system connected to deck and
drive clutches. Stabilizer rollers at rear of tractor
Seat
Standard: Molded-vinyl seat with armrests. Fore and aft adjustment
Construction:
Mainframe is 1.5 in x 2 in x .125 in (3.8 cm x 5.08
cm x .32 cm) rectangular steel tubing. Drive motors mounted to .179
in (.45 cm) welded steel. Front caster wheels mounted with roller
bearings on each wheel. Front caster forks are .375 in (.95 cm) steel
Deck Lift:
Foot-operated deck height adjustment. Pin for setting
height, detent for transport position
Controls
: Hand-operated choke/throttle, ignition switch, electric
mower clutch. Integrated parking brakes
Indicators:
Hour meter, engine warning light
Cup Holder:
Two cup holders molded into the left side fuel tank.
Accommodates nearly any cup size including Big Gulp
™
MOWING DECKS
44”, and 52” side-discharge decks
Type
Free-floating mower using three blades with center blade to
the front. Mower is suspended at the corners. Includes deck-mounted
rollers to improve flotation in rolling and uneven terrain.
Construction
11-gauge deck plate with an 7-guage deck plate
doubler with.125 in (.317 cm) welded steel. Solid 1 in x .375 in
(2.55 cm x .95 cm) steel bars reinforce impact areas on trim edges.
.187 in x .375 in (.47 cm x .95 cm) box-section reinforced front edge.
Steel deck housing is 4 in (10.16 cm) deep to provide room for high-
capacity mowing.
Deck Lift
Raise and lower deck from driver’s seat with simple foot-
operated deck height adjustment. Pin for setting height, transport
position. Change cutting heights, hop curbs and trailer more easily.
Cutting Heights
Foot-operated deck height adjustment. Pin for set-
ting height, detent for transport position. Height adjustment in .25 in
increments from 1 in to 4.5 in (2.55 cm to 11.43 cm).
Mowing Blades
Heavy-duty, heat-treated, high-lift steel blade
44 in: 16 in x 2.5 in x .20 in
52 in: 18 in x 2.5 in x .20 in
Blade Tip Speed
44 in: 16,100 fpm
52 in: 18,300 fpm
Blade Drive
V-belt drive to all three spindles. Spring tension idler
pulleys.
Spindles
Machine aluminum housing, 1 in (2.5 cm) diameter high
carbon steel shafts and sealed ball bearings.
Flotation
Suspended mower floats on four spring-assisted chains. 6
anti-scalp wheels are standard.
Width of Cut
44 in: 44 in (111.76 cm)
52 in: 52 in (132.08 cm)
Trim Capacity
(left side)
44 in: .5 in (1.27 cm)
52 in: 6 in (15.24 cm)
ACCESSORIES
BAC-VAC™ Catcher
Rear-mounted, 9-bushel hopper is dumped
from the seat without leaving the machine. Blower is powered from
right-side deck spindle (no pony engine required). Hopper and blower
can be added or removed in seconds.
Rear-Mount, 2-Bag Catcher
6-bushel capacity. Hand-dump wher-
ever you like or line with trash bags for easier handling. Blower is
powered from right-side deck spindle (no pony engine required).
Mulch Kit
Recycles clippings under deck allowing clippings to be cut
and recut, then discharged down into the grass. Reduces handling
of clippings, improves appearance, and recycles nutrients back to
the soil.
Hitch Kit
Optional bolt-on hitch with 7/8-inch hole. Will accept any
standard ball.
Flex Forks
Flex Forks
™
smooth out the ride producing a more even
cut especially over uneven terrain. A smoother ride allows for greater
operator comfort at higher speeds. Mow faster, get done sooner.
Light Kits
An aftermarket kit that mounts easily to the fuel tanks.
The light kit will allow you to start earlier and finish later. Available
for the FasTrak
™
, Hustler Mini Z
™
and Hustler Z
™
.
Specifications subject to change without notice.
Huster Turf Equipment
Mini Z
™
& Super Mini Z
™
Mini Z
™
/Super Mini Z
™
Specifications
Form No. 787416 4-06
ENGINE SPECIFICATIONS
Model
Kawasaki
Kawasaki
Kawasaki
Honda
Kohler
Horsepower
19
23
25
24
20
No. of Cylinders
2
2
2
2
2
Displacement
41.2 cu in (675 cc)
41.2 cu in (675 cc)
41.2 cu in (675 cc)
40.9 cu in (670 cc)
38.0 cu in (660 cc)
Compression Ratio
8.1:1
8.1:1
8.1:1
8.3:1
8.5:1
Max. Torque
37.0 ft lbs @ 2400 rpm
39.8 ft lbs @ 2400 rpm
41.0 ft lbs @ 2400 rpm
37.5 ft lbs @ 2500 rpm
36.2 ft lbs @ 2600 rpm
H u s t l e r T u r f E q u i p m e n t • H e s s t o n , K a n s a s 6 7 0 6 2 • 1 - 8 0 0 - 3 9 5 - 4 7 5 7
F o r m o r e i n f o r m a t i o n :
w w w . h u s t l e r t u r f . c o m