manualshive.com logo in svg

Hussmann Q2SSM12R, Installation & Operation Manual, Page: 3 / 30

Share
Download
Hussmann Q2SSM12R Installation & Operation Manual Download Page 3

 

TABLE OF CONTENTS 

iii

HUSSMANN CORPORATION • BRIDGETON, MO 63044-2483 U.S.A.

Q2SSM-R Merchandisers

ANSI Z535.5 DEFINITIONS 

  . . . . . . . . . .  iv

INSTALLATION

UL Listing   . . . . . . . . . . . . . . . . . . . . . . . . . 1-1
Federal / State Regulation    . . . . . . . . . . . .  1-1
Hussmann Product Control   . . . . . . . . . . .  1-1
Shipping Damage    . . . . . . . . . . . . . . . . . . .  1-1
Location  . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1
Unloading    . . . . . . . . . . . . . . . . . . . . . . . . .  1-2
Exterior Loading   . . . . . . . . . . . . . . . . . . . .  1-2
Shipping Skid  . . . . . . . . . . . . . . . . . . . . . . .  1-2
Merchandiser Leveling   . . . . . . . . . . . . . . . 1-3
Installation  . . . . . . . . . . . . . . . . . . . . . . . . . 1-3
Serial Plate Location   . . . . . . . . . . . . . . . . .  1-4
Self-Contained Refrigeration Equipment 
Start Up Check List    . . . . . . . . . . . . . . . . .  1-5

ELECTRICAL / REFRIGERATION

Merchandiser Electrical Data   . . . . . . . . . .  2-1
Field Wiring  . . . . . . . . . . . . . . . . . . . . . . . .  2-1
Electrical Connections . . . . . . . . . . . . . . . .  2-1
Electrical Outlet  . . . . . . . . . . . . . . . . . . . . .  2-1
Wiring Color Code   . . . . . . . . . . . . . . . . . .  2-2

START UP / OPERATION

Start-Up  . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
TEV Adjustment   . . . . . . . . . . . . . . . . . . . .  3-1
Load Limits   . . . . . . . . . . . . . . . . . . . . . . . .  3-1
Stocking   . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1
Thermometer   . . . . . . . . . . . . . . . . . . . . . . . 3-2
Load Limits   . . . . . . . . . . . . . . . . . . . . . . . . 3-2

MAINTENANCE

Care and Cleaning  . . . . . . . . . . . . . . . . . . .  4-1
Removing Scratches from Bumper  . . . . . .  4-2
Cleaning Under Fan Plenum    . . . . . . . . . .  4-2
Cleaning Discharge Air Louvers    . . . . . . .  4-2
Cleaning Stainless Steel Surfaces    . . . . . . .  4-3
Cleaning Coils   . . . . . . . . . . . . . . . . . . . . . .  4-3
Self-Contained Refrigeration Equipment 
Maintenance Check List   . . . . . . . . . . . . . .  4-5

SERVICE 

Replacing Fan Motors and Blades  . . . . . .  5-1
Replacement Parts List   . . . . . . . . . . . . . . .  5-2

APPENDIX

Shipping Weights . . . . . . . . . . . . . . . . . . .   A-1
Wiring Diagrams  . . . . . . . . . . . . . . . . . . .  A-2

WARRANTY

Summary of Contents for Q2SSM12R































Reviews:

No comments