wc_tx004557en.fm
18
Operation
MCT36-5 CN
The following is the Wacker Neuson approved percentage of oxygenates:
Ethanol (ethyl or grain alcohol) 10% by volume—You may use gasoline containing
up to 10% ethanol by volume (commonly referred to as E10 or “Gasohol”). Do not
use gasoline containing more than 10% ethanol (such as E15, E20, or E85)
because it could damage the engine.
MTBE (methyl tertiary butyl ether) 15% by volume—You may use gasoline
containing up to 15% MTBE by volume.
Methanol (methyl or wood alcohol) 5% by volume—You may use gasoline
containing up to 5% methanol by volume, as long as it also contains cosolvents
and corrosion inhibitors to protect the fuel system.
If there are any undesirable operating symptoms, try another service station, or
switch to another brand of gasoline.
Fuel system damage or performance problems resulting from the use of an
oxygenated fuel containing more than the percentages of oxygenates mentioned
above are not covered under warranty.
4.4
Installing the Blades
NOTICE:
Trowel blades must NOT be interchanged, i.e., do NOT put larger
diameter blades on a smaller diameter trowel.
1. When installing combination blades, orient the blades
(a)
as shown. This
positions the raised edges of the blade correctly for the clockwise rotation of the
machine.
2. Secure the blades to the trowel arms with screws
(b)
. Dip the threads of the
screws in grease prior to installation. This will prevent concrete from cementing
the screws in place and will make removal of the blades easier later on.
3. Plug the remaining threaded holes in the blade brace with plastic plugs
(c)
to
prevent them from filling with concrete.
wc_gr014738
b
c
a
