7. Move the fuel valve lever (A) to the ON position.
A
8. Let the fuel drain from the fuel tank.
To apply oil to the cylinder
1. Remove the spark plug.
2. Put approximately 5 cl of clean engine oil into the
cylinder.
3. Pull the starter rope handle approximately 5 times to
apply the oil equally in the cylinder.
4. Install the spark plug.
5. Pull the starter rope handle slowly. Pull until you feel
resistance and the notch on the pulley aligns with the
hole at the top of the starter cover (A).
A
6. Slowly move the starter rope handle back to its initial
position.
Technical data
Technical data
Husqvarna W50P
Husqvarna W80P
Inlet/outlet dimension, mm
50
80
Total level difference, m
28
28
Level difference for the suction hose,
m
7
7
Engine model
168FB
168FB
Maximum discharge capacity, m/h
32
54
Fuel tank capacity, l
3.6
3.6
Net weight/Gross weight, kg
25/27
28/30
Oil tank capacity, l
0.6
0.6
Type
Gasoline
Gasoline
Measured Sound Power Level, L
WA
dB (A)
108 dB (A)
108 dB(A)
Guaranteed Sound Power Level, L
WA
dB (A)
108 dB (A)
108 dB (A)
16
1421 - 004 - 09.07.2020
