Husqvarna VIKING Designer EPIC User Manual Download Page 57

Page: 57 / 202

Topbar

1. WiFi

mySewnet

™

3. Wireless firmware

update

JoyOS advisor

™ feature

5. Quick help

6. Settings

7. Sewing/embroidery

mode toggle

On the topbar you will find the following functions: WiFi,

mySewnet

™ button, firmware update,

JoyOS advisor

™ button,

quick help, settings and sewing/embroidery mode toggle.

Note: All functions may not always be available at the same time.

WiFi

Touch the WiFi button in the topbar and activate WiFi.
Select a network from the list of available networks. If your
network is password protected, you will be prompted to
enter the password in the pop-up.

You can also connect to a network with WiFi in settings.

If you do not get any signal or have a low signal strength see
troubleshooting.

WiFi is connected with high signal strength.

WiFi is connected with medium signal
strength.

WiFi is connected with low signal strength.

WiFi is connected but the network does not
work properly.

WiFi is disconnected. Connect to a network
through the WiFi button or WiFi settings.

Read more about WiFi in the machine in the WiFi chapter.

mySewnet

™

Touch the

mySewnet

™ button on the topbar and touch sign in

button to open a pop-up. Sign in to your

mySewnet

™ account

or create a new

mySewnet

™ account.

When signed in you will see how much available space there
is left in the

mySewnet

™ cloud.

The synchronization status will be shown on the

mySewnet

™

button on the topbar:

If your machine cannot connect to

mySewnet

™ cloud or does

not synchronize, see troubleshooting.

All files in the machine and

mySewnet

™ cloud

are synchronized.

The machine is currently synchronizing files
with the

mySewnet

™ cloud.

4 The Multi-Touch Screen

Summary of Contents for VIKING Designer EPIC










































































































































































































Search results

Summary of Contents for VIKING Designer EPIC

Reviews:

Related manuals for VIKING Designer EPIC

Brands by name

Popular brands

Husqvarna VIKING Designer EPIC, User Manual

Search results

Summary of Contents for VIKING Designer EPIC

Reviews:

Related manuals for VIKING Designer EPIC

Brands by name

Popular brands