Husqvarna VIKING Designer EPIC, User Manual

Page: 143 / 202

JoyOS advisor ™ feature
button
Load smart save button
To load the last performed smart save, touch the load smart
save button in the
JoyOS advisor ™ feature.
Note: When you touch smart save the previously saved smart save will
be deleted.
Auto Smart Save
When embroidering your DESIGNER EPIC™ machine will
continuously and automatically save your ongoing work,
including the loaded stitch, embroidery, current stitch
position and settings. If there is a power outage when you are
in embroidery stitch out a pop-up will appear when your
machine is restarted. In the pop-up you can choose to return
to embroidery stitch out and bring up the design ready to
stitch. The embroidery will start from approximately the
same position as it was interrupted from.
Tip: Before starting the embroidery go back a few stitches using the step
stitch-by-stitch control to ensure that the threads will be secured.
Thread Color Spools
All colors in the loaded design(s) are shown in the order they
will be embroidered in thread color spools. Underneath the
current thread color spool, information about the design
number and color order is shown. Also shown are the thread
manufacturer, thread weight and color number. Swipe left or
right on the thread color spools to activate the next or
previous color block in the color block list.
While embroidering, the shade of the active thread color
spool will fade indicating how much of the color block is left
to embroider.
Example: 1:2 RaRa 40 2254, means the second thread color
in the first design to be embroidered is Robison-Anton
Rayon 40 weight thread, number 2254.
Return to Embroidery Edit
Touch the return button to return to embroidery edit where
you can adjust your design(s).
9 Embroidery Stitch Out 143