Husqvarna VIKING Designer EPIC, User Manual, Page: 115 / 202

Zoom
Zoom in by touching with two fingers at the same time on
the screen and, without releasing, increase the distance
between the fingers to stretch. Zoom out by touching with
two fingers at the same time on the screen and, without
releasing, reduce the distance between the fingers to pinch.
If you zoom on a selected design, this will might activate the
position function and move the design instead of zooming.
Touch and hold to lock pan and prevent activating position
by mistake. A padlock below the button indicates that the
function is locked. You can now only pan and zoom. Select
the button again to unlock.
Alternatively use the zoom slider to zoom in and out in the
embroidery area. Move the slider to the right to zoom in and
to the left to zoom out. You will see how much you have
zoomed to the right of the slider.
Zoom Options
1. Zoom to all
2. Zoom to hoop
Touch zoom options to open a pop-up where you can
choose between zoom to all or zoom to hoop. Zoom to all
will show all the design(s) in the embroidery combination.
Zoom to hoop will adjust the embroidery area to fit the
selected hoop.
Undo/Redo
Undo
Redo
Touch the arrow pointing left to undo your latest design
adjustment. Touch repeatedly to step back through your
adjustments.
Touch the arrow pointing right to redo your latest design
adjustment. Touch repeatedly to step forward through your
adjustments. Redo is only activated when undo has been
touched.
Note: Not all adjustments can be undone. The buttons will be greyed
out if undo/redo are not possible.
Design Stitch Out Order
When working with a design combination that consists of
several designs it can be useful to know what order they will
stitch out. Select a design to see which stitch out number it is
of the total loaded designs. 3(4) for example means that the
selected design is the third out of four designs to be stitched
out.
8 Embroidery 115