Husqvarna TR 650 STRADA 2013, Workshop Manual, Page: 98 / 301

F.6
TR 650 TERRA 2013 - TR 650 STRADA 2013
H11493
1
2
3
4
5
5
6
7
H11494
1
2
H11495
1
2
3a
3b
4
5
6
ENGINE SETTINGS AND ADJUSTMENTS
Workshop Manual Ed.09-2012
Camshaft removal
- Remove the screws (1) with the washers.(2).
- Remove the top part of the support (3).
- Remove the chain (4) from the gears and fix to a point safe to avoid it from
falling into the engine.
- Remove the camshafts (5) with the chain gears.
- Remove the bottom part of the support (6).
- Remove the chain slider (7).
Pad replacement
- Mark the valve bucket (1) with a marker (e.g. A= intake valve).
- Extract the valve bucket (1)
- According to the measurement of the valve clearance, replace the pads with
those of a size appropriate to restore the correct valve clearance.
- Replace adjustment pad (2) with one having a thickness adequate to restore
the correct value, making sure it is firmly seated in the seat.
- Install the corresponding valve buckets as marked.
Camshaft assembly
- Install the chain slider (1) making sure that the top part of the slider is aligned
with the sealing surface.
- Mount the bottom part of the support (2).
- Lubricate all contact surfaces with engine oil.
- Fit the camshaft exhaust (3a), then the cam shaft intake (3b) with the timing
chain and positioning them in phase.
- Mount the top part of the support (4).
- Tighten the screws (5) with the washers (6).