Husqvarna Supermoto 701 2021 Owner'S Manual Download Page 16 | Manualshive

Page: 16 / 278

Husqvarna Supermoto 701 2021 Owner'S Manual Download Page 16

2 SAFETY ADVICE

14

2.6

Safe operation

Danger

Danger of accidents

A rider who is not fit to ride poses a danger to him or herself and others.

–

Do not operate the vehicle if you are not fit to ride due to alcohol, drugs or medication.

–

Do not operate the vehicle if you are physically or mentally impaired.

Danger

Danger of poisoning

Exhaust gases are toxic and inhaling them may result in unconsciousness and

death.

–

Always make sure there is sufficient ventilation when running the engine.

–

Use effective exhaust extraction when starting or running the engine in an enclosed space.

Warning

Danger of burns

Some vehicle components become very hot when the vehicle is operated.

–

Do not touch any parts such as the exhaust system, radiator, engine, shock absorber, or brake sys-
tem before the vehicle parts have cooled down.

–

Let the vehicle parts cool down before you perform any work on the vehicle.

Only operate the vehicle when it is in perfect technical condition, in accordance with its intended use, and in a
safe and environmentally compatible manner.
An appropriate driver's license is needed to ride the vehicle on public roads.
Have malfunctions that impair safety promptly eliminated by an authorized Husqvarna Motorcycles workshop.
Adhere to the information and warning labels on the vehicle.

«
...
14
15
16
17
18
...
»

Summary of Contents for Supermoto 701 2021























































































































































































































































































Reviews:

No comments