Husqvarna Supermoto 701 2021, Owner'S Manual, Page: 111 / 278

SERVICE WORK ON THE CHASSIS 12
109
12.11 Removing the seat
V00492-10
–
Pull on the loop
1
while raising the rear of the seat.
–
Pull off the seat sideways at the front ends from the side
cover.
–
Pull seat back and lift it off.
12.12 Mounting the seat
V00497-10
–
Stretch the seat at the front ends slightly and position holding
tabs
1
on holders
2
.
The holding tabs engage in the holder.
–
Press holding tab
3
into the bushings
A
.
–
Insert locking pin
4
into the lock housing
5
and push
down the rear of the seat until the locking pin engages with
an audible click.
–
Check, finally, that the seat is correctly mounted.