B
A
A
A
B
B
A
B
B
EN - 24
SPECIFICATIONS - OPERATION - MAINTENANCE
- Pour the necessary quantity of coolant in the radiator
then warm up the engine in order to eliminate any
possible air bubbles.
- Allow the coolant to cool down then remove cap (2)
and check the level as explained under “Coolant level
check”.
- Periodically check the connecting hoses (see “Sched-
uled Maintenance Chart”): this will avoid coolant
leakage and consequent engine seizure: If hoses (A)
show cracks, swelling or hardening due to sheaths
desiccation, their replacement shall be advisable.
- Check the correct tightening of the clamps (B).
WARNING
To fill in the system, set motorcycle on
a central stand, or in any case keep
the bike in a vertical position (not on
the side stand).
